How to program your access code for Impassa Security Alarm Panel. Self Contained Wireless Alarm System Models: SCW9055(D)(G)(I). 4.3 Installer Programming. DSC recommends that additional smoke alarms.

All Rights Reserved. Toronto, Canada • www.dsc.com • Printed in Canada The trademarks, logos, and service marks displayed on this document are registered in the United States [or other countries]. Any misuse of the trademarks is strictly prohibited and Tyco International Ltd.

Keypad Controls & Indicators indicates user can scroll through options LED Indicators 2x16 LCD Ready Armed Trouble System is Power Ready to Arm Scroll Keys Function Keys: Stay Dual Action Keys: Away Fire Chime Auxiliary Bypass Zones Panic Quick Exit Select Option. • 4.2 Night Arming To night arm the system when it has been armed in Stay mode, press [ ][1] at the keypad. All inte-  rior zones will now be armed except for devices programmed as Night zones. NOTE: Your installer can also program a function key on the keypad that allows you to arm the system in Night mode. • Disarming Error If your code is invalid, the system will not disarm and a 2-second error tone will sound. If this hap- pens, press [#] and try again. 4.8 Remote Arming and Disarming The system can be armed and/or disarmed, if programmed by the installer, using a remote control device (wireless key).

How do I power cycle the box? I guess after linking them this thread, the ADT Operations Support Manager was kind enough to give us a call and leave me a message a few days ago. I had a little bit of trouble getting a hold of her but we finally spoke today. At first she talked about liability, different types of buildings, possible injury, WCB claims.???

[1] Supervisor’s Code [2] Duress Code [3] Zone Bypassing [4] Remote Access [5]-[6] Future Use [7] Bell/Siren Squawk Output [8] One Time Use Code. • Smoke detectors should always be installed in USA in accordance with Chapter 11 of NFPA 72, the National Fire Alarm Code: 11.5.1.1 Where required by applicable laws, codes, or standards for a specific type of occupancy, approved single- and multiple-station smoke alarms shall be installed as follows: (1) In all sleeping rooms and guest rooms. Are furnaces and wood-burning appliances properly installed, clean and in good working order?

Updated versions of this User Guide are available by contacting your distributor. IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electric shock and/or injury, observe the following: • Do not spill any type of liquid on the equipment. About Your Security System Read this manual carefully and have your installer instruct you on your system's operation and on which features have been implemented in your system. All users of this system should be fully instructed in its use. Fill out the “System Information” page with all of your zone information and access codes, and store this manual in a safe place for future reference.

Note you will have to re-enter the time/date when you do that. Assuming 5010 or 5555 works, how do I get out of installer mode after entering the code?

• Self-Contained Wireless Alarm System v1.0 User Manual WARNING: This manual contains information on limitations regarding product use and function and information on the limitations as to liability of the manufacturer. The entire manual should be carefully read. • Table of Contents 1. About Your Security System 1.1 Fire Detection (must be enabled by Installer).. 2 1.2 Carbon Monoxide Detection (must be enabled by Installer).

Fill out the “System Information” page with all of your zone information and access codes, and store this manual in a safe place for future reference. Keypad Controls & Indicators indicates user can scroll through options LED Indicators 2x16 LCD Ready Armed Trouble System is Power Ready to Arm Scroll Keys Function Keys: Stay Emergency Keys: Away Fire Chime Auxiliary Bypass Zones Panic Quick Exit Select Option. • 4.2 Night Arming (Setting) To night arm/set the system when it has been armed/set in Stay mode, press [ ][1] at the keypad. All interior zones will now be armed/set except for devices programmed as Night zones. NOTE: Your installer can also program a function key on the keypad that allows you to arm/set the system in Night mode. Format undangan pernikahan.

• Smoke detectors should always be installed in USA in accordance with Chapter 11 of NFPA 72, the National Fire Alarm Code: 11.5.1.1 Where required by applicable laws, codes, or standards for a specific type of occupancy, approved single- and multiple-station smoke alarms shall be installed as follows: (1) In all sleeping rooms and guest rooms. Household Fire Safety Audit Read this section carefully for important information about fire safety. Most fires occur in the home.

• Self-Contained Wireless Alarm System v1.2 User Manual This manual contains information on limitations regarding product use and WARNING: function and information on the limitations as to liability of the manufacturer. The entire manual should be carefully read. • Table of Contents 1. About Your Security System 1.1 Fire Detection (must be enabled by Installer). 2 1.2 Carbon Monoxide Detection (must be enabled by Installer). • If You do not 6. ARBITRATION - All disputes arising in connection with this agree to the terms of this EULA, DSC is unwilling to license the SOFT- Agreement shall be determined by final and binding arbitration in WARE PRODUCT to You, and You have no right to use it.

To lock the keys: 1. • NOTE: Only use Energizer (4) 1.5V AA alkaline batteries (WT5500, WT4901/WT8901). DO NOT RECHARGE THESE BATTERIES. DISPOSAL OF USED BATTERIES MUST BE MADE IN ACCORDANCE WITH THE WASTE RECOVERY AND RECYCLING REGULATIONS IN YOUR AREA.

After Vonage rerouted the number, the panel had no problem calling in.

The Trouble ( ) indicator will flash. Access Code Programming In addition to the master code, you can program up to 16 additional user access codes. To program User Access Codes: 1. Disarm your system, if it is armed/set. Press [ ][5][Master Access Code (i.e., 4- or 6-digit code)]; the armed ( ) indicator will turn on. • Next, scroll to the attribute you want to program and press [ ] (or enter the attribute #) to enable/dis- able the attribute.

Keypad Keys, Indicators, and Commands Status Lights Ready - Must be on to arm /set the system. All zones must be secured or bypassed and the system disarmed for this light to activate. • Keypad Keys, Indicators, and Commands (Continued) Program User Codes Press []buttons to scroll to user code. Enter Change Attributes [Master Code][9][xx] to enter the user code (xx = 1-16).

I email again, this time escalated to ADTCanada to pay for the service which would make me a customer by definition. They say no, citing the quotation above. (I previously asked why a sales rep can come in, check security points, etc and 'apparently' they are under a different policy). Last try to contact and resolve, I call and inquire if I had 'active' monitoring, how much would it be?

6321, 5555, 5010 are common codes for the DSC832. Because you will NOT be able to easily use the system with another company even though you OWN it.

• 21.1 Access Codes  Master Code [40]: ______________________ Proximity Tag: Wireless Prox Wireless Prox Code Access Code Code Access Code                     . Keypad Quick Guide The following table summarizes the keys, indicators, and most often used commands of the keypad.

• Always ensure you obtain the latest version of the User Guide. Updated versions of this User Guide are available by contacting your distributor. IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electric shock and/or injury, observe the following: • Do not spill any type of liquid on the equipment. About Your Security System Read this manual carefully and have your installer instruct you on your system's operation and on which features have been implemented in your system. All users of this system should be fully instructed in its use.

Keypad Keys, Indicators, and Commands Status Lights Ready - Must be on to arm system. All zones must be secured or bypassed and the system dis- armed for this light to activate. • Keypad Keys, Indicators, and Commands (Continued) Program User Codes Press []buttons to scroll to user code. Enter Change Attributes [Master Code][9][xx] to enter the user code (xx = 1-16). [1] Supervisor’s Code [2] Duress Code [3] Zone Bypassing [4] Remote Access [5]-[6] Future Use [7] Bell/Siren Squawk Output [8] One Time Use Code.

Time & Date Programming and Temperature Display Press [ ][6] then enter your master access code to enter User  HH:MM MM/DD/YY Functions. Use the [] buttons to find the menu option, then press [ ] to select. Free uml modeling tool for windows. Enter the time in 24-hr. Format (HH:MM), fol- . • NOTE: If an access code is required to enter bypassing, only the master code and codes with Supervisory enabled can set the Bypass Group.

As the only individual in contact tion and motion can only be detected in unobstructed areas covered by with system users, it is your responsibility to bring each item in this warn- these beams. • © 2012 Tyco International Ltd. And its Respective Companies. All Rights Reserved. Toronto, Canada • www.dsc.com • Printed in Canada The trademarks, logos, and service marks displayed on this document are registered in the United States [or other countries]. Any misuse of the trademarks is strictly prohibited and Tyco International Ltd.

Here's quite an interesting find I came across last week. Back in january, I had purchased an ADT-branded Ademco Vista from another forum member, and installed it in my neighbor's place to replace his defective Radio Shack 'alarm system'. From having programmed the system, I remember what the installer code that ADT programmed was. It must be hardcoded, because when I defaulted the panel, it kept this code the same. Last week, I was testing fire alarm systems in a school district about an hour or so from me.

Have a professional evaluate these appliances. Fire Escape Planning There is often very little time between the detection of a fire and the time it becomes deadly. It is thus very important that a family escape plan be developed and rehearsed. • WARNING Please Read Carefully N o t e to I n s ta ll er s provide volumetric area protection. They have multiple beams of detec- This warning contains vital information.

To minimize this danger, we recommend that a household fire safety audit be conducted and a fire escape plan be developed. • If You do not 6. ARBITRATION - All disputes arising in connection with this agree to the terms of this EULA, DSC is unwilling to license the SOFT- Agreement shall be determined by final and binding arbitration in WARE PRODUCT to You, and You have no right to use it.

Security.livewatch.com/./how-to-find-the- master-or- installer- codes-for. • Aug 7, 2009. Ademco?€?Vista series?€ alarm system and you don?€™t knowwhat the codes are. The master code is the main user?€™s regular code, but different than the. Be advised that an installing alarm company will not and should not.

Im ready to cancel any day now. I didnt try this before because I was afraid I was going to mess something up, so now Im trying to see if I can access my panel menus. When I try *8 then enter the installer code how do I know if I got it right or not? I entered 5010 and it just beeped at me. Nothing is displayed on the screen. It did not say 'Invalid access code' I just set the time (*6) it didnt display anything on the screen either when I was entering the time. Maybe the display is turned off for menu?

They say probably a couple of hundred negotiated with the installer. Ridiculous, for less than a minute of work. Now, if I really want to tinker with the system and do it myself, I can physically jumper the main panel in the basement box, but this requires re-programming my whole house and could take a few hours. The upside is I set my own installer code, and I can get it to call my cell or any number if it goes off, and have it work in conjunction with my cameras. Not for the technically challenged. My recommendation to you is to figure out if you have a default installer code, or obtain it while still on contract.

Figuring out installer codes on Ademco systems isn't exactly rocket science, or a trade secret. Why would it be the same code? Yeah, ADT doesn't sell actual security unless you pay them with an arm, a leg, and your first born child. They'll sell you a $99 'basic' system that is easily defeatable by a good criminal. They'll sell you a false sense of security and peace of mind at $30/month to monitor it (or $10/month if you work for Tyco fire/security. But I shouldn't tell everyone that.) I don't know how safe the average person would feel if they knew how that code is common on all of their systems, and what someone could potentially do with it.

So now that I know my installer code does that means I can use this system with any alarm company I want?? Find out from adt what phone number your panel is trying to call and then manually dial the number from your real telephone to see if it actually works. ADT might be using a special phone number that the voip provider doesn't know how to handle. You would assume they use a 1-800-xxx-yyyy phone number, but I've seen where they are trying a 1-700-xxx-yyyy or 1-600-xxx-yyyy phone number. The voip company might not be set up to handle these special phone numbers. My buddy had to call his voip provider (i.e. Vonage) so they could setup the number properly.

On the day it happened, the panel beeped and I got a trouble light, alphanumeric=unable to contact ADT. In order to disable the warning, I would normally need to do this: *8 5010 015 7 ### for TLM disable, then power cycle the panel. Problem is, the installer code is not default 5010 or a handful of other possible default codes, it is a local ADT code. I contact my local ADT, they will not release any installer codes.